Dưới đây là những mã lỗi thường gặp ở máy in brother, bằng nguyên bản tiếng Anh, mình sưu tầm được và chia sẽ lại. Nên mình để nguyên bản tiếng Anh, các bạn có thể đọc nếu không hiểu có thể nhờ anh GOOGLE dịch giúp nhé !!!

Mã lỗi: Error: E50
Diễn giải: Malfunction of fuser unit: The fuser unit is the part in the machine that gets hot to bond the print onto the paper. The printer has detected that there is a problem with the temperature, too hot or not heating up enough.
Cách xử lý: Switch the machine off for 5 minutes and then back on again. Leave the machine for 10 minutes and it may recover. If fault persists, the fuser unit will need replacing.

Mã lỗi: Error: E51
Diễn Giải: Malfunction of laser unit: The laser unit is the part of the printer that writes the information on the drum surface. The error code means that the laser beam is not being detected
Cách xử lý: Switch the printer off and back on again. If error persists then the laser safety flap may be defective or the laser unit may need replacing

Mã Lỗi: Error: E52
Diễn Giải: Malfunction of laser motor: The laser unit is the part of the printer that writes the information onto the drum surface. Within the laser unit is a spinning mirror and the motor that drives it is faulty.
Cách xử lý: Switch the printer off and back on again. If error persists then the laser unit will need replacing.

Mã Lỗi: Error: E54
Diễn giải: Malfunction of main motor: The main motor drives the main gear train, which in turn drives all the printing functions, and the printer has detected a problem with this.
Cách xử lý: Switch the printer off and back on again. If the error persists try turning on the printer without the toner unit in it and see if the motor now turns. If it does then replace the toner unit but if error persists the main motor will need replacing.